Terms of Use | I then purchased the WCB6200Q directly from Verizon. If you have a separate modem and router setup then you also need an ECB2500C installed at the modem/router location to provide a MoCA signal onto the coax network.". Where did you get the WCB3000N? To clarify, I first bought the WCB3000N from Amazon. I then purchased the WCB6200Q directly from Verizon. The router is connected to the FIOS coax cable from the wall. 12 1. Trademark Policy | WCB6200Q Wireless Network Extender Specifications Model Number WCB6200Q Protocol/Standards/Support Wireless IEEE 802.11ac Ethernet IEEE 802.3/802.3u/802.3ab 10/100/1000 Base-T MoCA 1.0/1.1/2.0 LAN Interfaces Two 10/100/1000 Ethernet One MoCA 2.0 bonded Coaxial Jack LED Indicators Power, Coax, Wi-Fi 2.4 GHz, Wi-Fi 5 GHz, LAN Ethernet 1, I still need the ECB2500C to provide the signal even if i went into my modem settings to turn on MoCA? If you are the site owner (or you manage this site), please whitelist your IP or if you think this block is an error please open a support ticket and make sure to include the block details (displayed in the box below), so we can assist you in troubleshooting the issue. I experienced the same problem. Fingers crossed that it stays that way!

The coax light never came on, so I decided to return it. So far, not so much. I have a FIOS Quantum Gateway G1100 router (which is supposed to have MOCA functionality). Actiontec ... Superior WiFi Optimized for You - Actiontec.com I purchased it from Amazon, I don't know what firmware was on it, but I am returning it. A.

Powering up the WCB loses the internet connection and Windows 7 network utility says: "currently connected to unidentified network" but with no additional information. Privacy | The other goes to the WCB300N.

Mar 5, 2016. thanks for your help with this one. I have tried pressing the button on both the router and the WCB (first one, then the other; then reversing the order) but that didn't work either. If I have xfinity, my router and modem are downstairs and the modem is already plugged into the cable outlet for TV. When I connected the WCB3000n to another FIOS coax cable from the wall in another room, the coax light does not come on (tried this with and without the splitter which came with the WCB). Did the various reset suggestions, but the coax light is not comng on. The lights for the 2.4 GHz and 5 GHz lights to come on. Warranty. There still seems to be other devices connected via MoCA, but the Coax light won't go green on the WCB3000N. Instead, I bought the WCB6200Q directly from Verizon, thinking I would have better luck. I just need to replicate the exact cause now, privacy issue or duplicate moca Aug 7, 2016 #23 of 57 ektimmer New Member. I've even tried connecting directly to the cable coming out of the wall. David just to clarify in one post you say you have a WBC6200Q another post you say you have a WCB3000N. I experienced the same problem.

Fingers crossed that it stays that way! I went into my online xfinity modem settings, and turned on MoCA. No coax light indicates there is no MoCA signal on the coax network. I have web access after connecting main Comcast line into the 2-way splitter. Would appreciate any suggestions . If you still have no coax light on the WCB6200Q or the ECB2500C then contact Actiontec Support 1-877-565-2632 and we will setup assist in further troubleshooting to resolve the issue. Which unit do you have?

The coax light is all that does not light so hopefully fixing that will allow me to access the WCB300N for use. www.tivocommunity.com/community/index.php?threads/actiontec-wcb6200q-wifi-extender-no-moca-light.542419/page-2, Mozilla/5.0 (Windows NT 6.1; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/83.0.4103.116 Safari/537.36. "No coax light indicates there is no MoCA signal on the coax network.

Message 1 of 2 (1,832 Views) Have had the WCB6200Q Extender hanging off a splitter for several months now, but recently, no internet. However, after leaving the WCB6200Q unplugged all day and reconnecting to the coax wire this morning, it is now working. Access from your Country was disabled by the administrator.

If you have a separate modem and router setup then you also need an ECB2500C installed at the modem/router location to provide a MoCA signal onto the coax network. WCB6200Q Extender no coax connection light ‎10-19-2018 06:27 PM. Is there something I am missing or is the WCB defective? 1 goes to a router and then a PC. I know 6200q is a picky device and the Actiontec tech support needs to get up to speed a little bit on this one.